What makes Eurolls stand out in general, and particularly in this field, is the concept of maximum flexibility and versatility. Eurolls has extended the use of cold rolling cassettes into sectors such as compaction of high carbon and stainless steel strand. By using the basic cassettes technology, Eurolls has been able to produce special version to meet the most varied market demands with regards to the production of special profiles.
Therefore, cassettes with only two, three, and four rolls or 4+4 rolls have been produced. Custom made, four rolls driven cassette coupled with idle cassette and suitable for producing ribbed squares up to 25mm is part of the “special cassette” such as the rotating cassette to produce spiral wire.
CUSTOM MADE CASSETTE CL45CIS20
Cassette for making imprints on the high-carbon wire; simply structured with two rolls working synchronously to be able to make symmetrical imprints on the wire.
CUSTOM MADE CASSETTE CL50AS33
Cassette for performing high-carbon cable compacting, structured on the basis of its smaller sister cassettes CB and CA. It differs in the size of large pins and rolls to withstand large loads and large inlet diameters.
CUSTOM MADE CASSETTE CL25TQ40
Cassette for performing square and triangular section wires; it consists of 4 synchronized rolls positioned at 90° from each other, which can process square section wire up to the width of 10 mm. The rolls can also be adjusted independently to be able to facilitate obtaining rectangles.
CUSTOM MADE CASSETTE CL25L33
Simultaneous backhoe adjustment cassette; this cassette combines the structure of the CA and CB construction cassettes and the compactness of the C1 cassette. The result is a compact cassette for producing ribbed wires as small as 1.5 mm by avoiding independent adjustment of each roll.
CUSTOM MADE CASSETTE CL40G20
Modular cassette for large wire rolling. The principle of this cassette is the same as the other modular cassettes, with large Ø140 rolls to facilitate larger inlet diameters and to be able to withstand larger loads such as for titanium or stainless steel wires.
CUSTOM MADE CASSETTE CR170-4
Rotating box for twisted wire, consists of 4 rolls placed on a rotating spindle driven by a motor capable of executing twisted square section wires according to regulations.
These cassettes are normally mounted on one or more drafts machines and used as a base for lattice girders, mesh, or generally reinforced concrete application.
Suitable for achieving tight tolerances when processing different materials, the Type C microcassette can easily replace traditional die boxes on multi-pass lines due to its compact dimension.